Home ER1651U
The ER1651U is another component of the Nitek cutting edge Etherstretch™ line. The ER1651U Receiver combined with an ET1551U Transmitter (sold separately) provides a solution that utilizes existing 2 wire UTP cable infrastructure to transmit data from IP cameras and other network devices. The ER1651U/ET1551U combination can extend Ethernet range up to 300 meters (1.000 feet) over a single pair of wires.
The ER1651U is another component of the Nitek cutting edge Etherstretch™ line. The ER1651U Receiver combined with an ET1551U Transmitter (sold separately) provides a solution that utilizes existing 2 wire UTP cable infrastructure to transmit data from IP cameras and other network devices. The ER1651U/ET1551U combination can extend Ethernet range up to 600 meters (1968 feet) over a single pair of wires.
The ER1651U is a multi-port unit that can provide extension of Ethernet for up to 16 IP video cameras and network devices. An internal Layer 2 Switch with a Gigabit LAN connection, operates in conjunction with the ET1551U Transmitter units. Using the ER1651U over any ordinary Twisted Pair cable for a distance of 300 meter (1.000 feet) requires no additional equipment other than the new ET1551U Transmitter(s).
This New Etherstretch™ system requires very little installation time and no set up or configuration. The system is completely transparent to the network with no IP or MAC addressing required. Simply connect a network device to the Transmitter. LED connectivity indicators on the Transmitter and Receiver show the status of network communication and PoE power.
The ER1651U Etherstretch Network Extender overcomes cable distance limitations inherent in traditional networking topologies and provides an alternative to Fiber or Wireless Transmission Solutions.
• Transmits IP data up to distances of 300 meters (1.000 feet)
• Includes a built-in power source for all connected devices
• Gigabit output network connectivity
• Fully transparent to the network
• Supports any 10/100 mega-pixel network device, including IP cameras, over Twisted Pair cables
• LED indicators for network signals, link status and power
• Built-in short circuit, over current and over voltage protection
• Ground loop isolation
• Made in the U.S.A
Network Output Port | (1) RJ45 Connector, 1 Gigabit |
Link Port | 16 Twisted Pair Wires |
Ethernet Connection | [1] Auto Configuring 10 / 100 Full Duplex |
LED Connectivity Indicators | Link Status, PoE Out, 10Mb or 1000Mb |
Power Requirements | IEC380 Connector -115-240VAC/50-60Hz/150Watt Max |
Power Output | 52Vdc @ 125 Watts Max |
Mounting | Standard rack mounting 1 RU x 9.0 inches D |
Operating Temperature | -15 degrees to +75 degrees C/0 degrees to 167 degrees F |
Humidity | Up to 95% non-condensing |
Shipping Dimensions | 18 inches W x 24 inches H x 8,5 inches D |
Shipping Weight | 11 lbs. |
ET1551UW Specification Sheet Last Updated: March 13, 2018
ET1551UW Installation Manual Last Updated: September 12, 2017
Factory Reset Procedure Last Updated: December 12, 2017
ET1551U A&E Specification Last Updated: April 18, 2018