VB43ATF
Home VB43ATF
VB43ATF
Power video balun to combine CCTV video, camera power and data for camera control for operation over twisted pair up to 750 feet (225 meters) in conventional UTP applications, 100 meters in TIA/EIA 568 applications..
Product Description
Power video balun to combine CCTV video, camera power and data for camera control for operation over twisted pair up to 750 feet (225 meters) in conventional UTP applications, 100 meters in TIA/EIA 568 applications.
The VB43ATF is a unique transmission device which provides an economical means of sending video, camera power and 2 wire control signals over a standard Category 5 cable. Video is sent over one pair, 2 wire control signals over a second pair and camera power is sent over the two remaining pairs. A mini-coax pigtail with male BNC is used on the VB43ATF. Two pair of screwless terminals are provided to connect 2 wire control signals and power (wires are provided for these connections). Connections to the Category 5 cable are made via an RJ45 connector.
The VB43ATF power video balun provides the same high immunity to noise and interference as all of the Nitek baluns. This simplified wiring scheme provides a convenient method of powering the camera, allowing for quicker and easier installations. The RJ45 modular jack uses standard 568B wiring so spare network cables can be used. The VB43ATF also offers indication lights for the presence of power and data.
Features
• Intelligent light link indication
• Superior video over ordinary twisted pair cable
• Quick connect screwless terminals
• Immunity to noise and interference
• Rugged ABC flame retardant casing
• Lifetime warranty
• Built-in surge suppression
• Passive devices—do not require power
• Convenient connection to Category cable for video power and 2-wire control signals Easier to install than coax
Tech Specs
| Transceiver Unit | |
| Size w/mounting tabs | 0.87″H x 1.87″W x 1.25″D |
| Power Requirements | NONE REQUIRED |
| Power Pass Through | 250mA @ 1,000 feet (300 meters)on 24 AWG
1 Amp @ 100 feet (30 meters) on 24 AWG |
| Video Input | 1 vpp composite video
monochrome or color |
| Output | Balanced low voltage current loop |
| Modular Jack | Standard RJ45 |
| System (2 Transceivers Required) | |
| Video Format | RS170, NTSC, PAL, SECAM,
CCIR (Color or B/W) |
| Video Input | 1 vpp composite video monochrome or color |
| Operating Frequency | DC to 10 MHz |
| Common Mode Rejection | >60 dB typ. |
| Temperature Range | -10 degrees C to +85 degrees C |
| Humidity Range | 0 to 98%, non-condensing |
| Transient Immunity | 6,000 V 1.2uS x 50 uS per ANSI / IEE 587 C62.41 B3
3,000 A 8uS x 20 uS when ground screw terminal is connected to earth-ground |
| Twisted Pair Connection | RJ45 modular connector |
| Transient Immunity | Built-in |
| Wire Spec | 26 to 12 AWG Unshielded Twisted Pair (UTP) |
| DC Loop Resistance | 51 Ohms/1,000 feet (max) (51 Ohms/300 meters) |
| Normal Capacitance | 17pF/ft. |
| Impedance | 100 Ohms +/- 20% |
| UTP Category | 2 or better |
Downloads
VB43ATF Specification Sheet Last Updated: September 14, 2017
VB43ATF Installation Manual Last Updated: September 14, 2017
VB43ATF A&E Specification Last Updated: September 14, 2017