VH3200
Home VH3200
VH3200
The VH3200 is a 32 port powered video hub with built-in surge suppression and video detection. Systems operate with other Nitek UTP video equipment including, Video transceiver hubs, standard video balun transceivers, active transmitters, or any twisted pair equipped camera.
Product Description
The VH3200 is a 32 port powered video hub with built-in surge suppression and video detection. Systems operate with other Nitek UTP video equipment including, Video transceiver hubs, standard video balun transceivers, active transmitters, or any twisted pair equipped camera.
The VH3200 series UTP modular hub system holds up to four VB41x8, TR515x8 or TR560x8 8 channel video receiver cards in any combination, for a total of 32 input ports. The VB41x8 can be used on video runs up to 750 feet (225 meters). The TR515x8 can be used up to 1,500 feet (450 meters) with passive transmitters. The TR560x8 can be used up to 3,000 feet (900 meters) with passive transmitters and up to 6,000 feet (1,800 meters) with the NITEK TT560 active transmitter.
Features
• Quality video over ordinary twisted pair cable
• Immunity to noise and interference
• Built-in surge suppression on VB39 models
• Passive devices – do not require power
• Video & P/T/Z over a single pair (with up-the-coax systems)
• M – version mounts directly to camera or video source
• Weatherproof design
• Easier to install than coax
• Made in the U.S.A.
Tech Specs
| Size | 1 RU x 6.0″ (D) |
| Power Requirements | 24 VAC @ 800mA (Wall transformer provided with unit) |
| Video Input | Balanced low voltage current loop |
| Video Output | 1 Vpp composite video monochrome or color |
| Common Mode Rejection |
>70dB |
| Video Format | RS170, NTSC, PAL, SECAM, CCIR (Color or B/W) |
| Twisted Pair Connection |
Screw terminals providing balanced low voltage current loop |
| Operating Frequency | DC to 10 MHz |
| Temperature Range | -20 degrees C to +55 degrees C |
| Humidity Range | 0 to 98% non-condensing |
| Enclosure Type | Standard 19″ rack 1 RU in height |
| Wire Spec | 26 to 12 AWG Unshielded Twisted Pair (UTP) |
| DC Loop Resistance | 51 Ohms/1,000 feet (max) (51 Ohms/300 meters) |
| Normal Capacitance | 17pF/ft. |
| Impedence | 100 Ohms +/- 20% |
| UTP Category | 2 or better |
Downloads
VH3200 Specification Sheet Last Updated: September 14, 2017
VH3200 Installation Manual Last Updated: September 14, 2017