Home MS-100
MS-100 Single Channel 10/100 Media Converter for Single-mode Fiber
MS-100 Single Channel 10/100 Media Converter for Single-mode Fiber
• Industry’s smallest miniature design
• 1 x 10/100 (Fast Ethernet) RJ45 Network port
• 1 x 100BASE-LX SC duplex single-mode port
• Converts copper 10/100 Ethernet signals to optical to extend past standard cable limits
• Compliant with IEEE802.3 standards
• Autosensing MDI/MDIX crossover on network port
• LED indicators for network signals, link status and power
• Made in the U.S.A.
Network Port | RJ45 Connector |
Optical Port | Duplex SC 1310nm for use with single-mode fiber |
Ethernet | 10/100Mb on copper port, full or half duplex |
Ethernet on Optical Link | 100Mb full duplex |
Max operating distance electrical | up to 100m / 330ft on Network Port (10/100 copper) |
Max operating distance optical | up to 20km / 12.5mi using SC duplex single-mode 9um fiber |
LED Indicator | Orange/Green Flashing LED for 10/100BASE Electrical link and activity |
Green/Flashing LED for optical link and activity | |
Green LED for Power | |
Optical Wavelenght | 1310nm |
Optical Launch Power | -3dBm (max) to -9dBm (min) |
Minimum Receiver Sensitivity | -32dBm @ 1x10E-10 BER |
Receiver Overload Power | -3dBm |
Minimum Optical Budget | 23dB |
Rating/Listings | IEC/UL62368-1 |
Rating/Listings NEMA TS-2 | |
Operating Temperature Commercial | 0C to 50C / 32F to +122F |
Humidity | Up to 95% non-condensing |
System Latency | <1mS |
Power Requirement | 6-15V DC/8-18V AC (12V DC recommended) |
Power used | 2 Watts |
BTU Rating | 6.8BTU/hr |
Shipping Weight | 0.45kg / 1lb |
Shipping Size (HxDxW) | 64mm x 133mm x 189mm / 2.5” x 5.25” x 7.45” |
MS-100 Technical Specification Last Updated: April 12, 2018
MS-100 Installation Manual Last Updated: November 30, 2017