Nitek

800-528-4343 | 847-259-8900
IPCOAX1 - Nitek
Image
IPCOAX1

IPCOAX1

The IPCOAX1 is a single channel IP Camera and PoE plus Surge Protector with an independent protection circuit for 12 or 24V power, for applications where heater units or higher power PTZ units may be required.

Product Description

The IPCOAX1 is a single channel IP Camera and PoE plus Surge Protector with an independent protection circuit for 12 or 24V power, for applications where heater units or higher power PTZ units may be required. The IPCOAX1 is an in-line, IP over Coax network surge protector for 10/100 or Gigabit network devices with a separate input for 12 or 24 VAc or DC power. The IPCOAX1 IP Ethernet over Coax Surge Protector is designed to provide surge protection for one network port. The unit has female BNC connectors at the input and output to protect the network cable and push-in terminals for the 12-24V supply. The IPCOAX1 is ideally suited for small or restricted spaces when network protection is needed. The unit provides a heavy, single point ground connection and is easy to install in minutes. The IPCOAX1 is recommended for use with the Etherstretch™ family of products to provide IP network and PoE plus protection. The IPCOAX1 is covered by a Lifetime limited Warranty.

Features

• Ethernet over Coax protection in 10/100 or Gigabit Networks
• Heavy single point ground
• Easy to install
• Lifetime warranty
• Separate power protection for 12 or 24VDC/VAC

Tech Specs

Size 0.9″ H x 2.5″ W x 1.8″ D
Power Requirements None required
Network Connection Method Standard female BNC connectors
Power Connection Method Push-in terminals – rated at 5 amps
Clamping-Data/PoE Plus/Ethernet 58Vp-p
Clamping-12/24V/Ac or DC 30Vrms
Impedance 50 or 75 ohms
Temperature -40C to +85C
Transient response Time 1 picosecond (typ)
Shipping Weight 1 lb

Downloads

IPCOAX1 Specification Sheet Last Updated: August 25, 2017
IPCOAX1 Installation Manual Last Updated: August 25, 2017