16 channel video, power and data distribution unit. Systems operate with other Nitek UTP video transceivers, active transmitters or any twisted pair equipped camera.

This simple to install rack mounted solution contains a UTP video receiver and is integrated with a 28VAC [1] PS115 power supply, [1] CX452 modular card cage and [4] CHM22 modular cards. The UTPSYS16 is a system which transmits video, power and data through the UTP cable. The cable terminates with a standard RJ45 networking connector. Nitek recommends a maximum cable distance of 750 feet (225 meters) which may be reduced based on camera power requirements. Video, camera power and data will be separated from the cable through a VB31AT video balun.

The UTPSYS16 provides power and video detection LED’s for easy trouble shooting. Camera port are individually fused with a self resetting fuse. The UTPSYS16 and the DVR are ready to communicate in a matter of minutes by simply connecting a standard coaxial cable between the BNC video output connectors of the UTPSYS16 product and the DVR.

The systems can also adapt to existing communication and computer network spare pairs or new cable installations. These units provide superior immunity from noise and interference, even when run in common raceways with AC.

U.S. Patent No. 7,193,149

• Provides Class II camera power, P/T/Z distribution and video over a single UTP cable
• Independently selectable 24VAC-OFF-28VAC with 1.25 Amp max. per channel
• Each port is individually fused by self resetting PLC fuses
• Expandable - additional cards can be added for future expansion
• LED indicators for power and P/T/Z data
• Standard datacom structured cabling pinouts TIA/EIA 568B using RJ45 connectors.
• Class II UL certified