Nitek Video and Power over UTP System

Active Video & Power Balun System - for UTP Cables

Model Number: TS510M

  • Complete UTP Transmission System
  • Receives Video & Provides Power to Camera over UTP
  • Selectable from 100 to 1,000 feet (300 meters)
  • RJ45 connects UTP Category Cables
  • The TS510 is a complete video system designed to transmit video and remotely power one stationary camera over one Category 3 or better twisted pair cable. The system consists of a TR510M active receiver and a VB43ATF transceiver. The units work equally well over existing communication and computer network spare pairs, or new cable installations. Advanced receiver electronics provide complete immunity from ground loop, hum and noise to produce maximum video quality with virtually no loss.

    Dip switches on the TR510 unit provides precise adjustment of gain and frequency compensation, allowing the system to be fine-tuned for any cable. This unique feature provides easy adjustment for optimum performance over the entire operating range and also allows cable length to be estimated with a wide safety margin, when bidding CCTV twisted pair transmission jobs.

    The system includes RK45 jack connectors for quick and confident connections.The TR510M also features intelligent light link indicators to detect the presence of video and power.

    • Intelligent Light Link Indicator
    • RJ45 Jack Connectors
    • Power Low-wattage Cameras From Head-End
    • Active electronics compensate for frequency and level loss
    • Built-in protection from power surge, transients,static or other electrical interference
    • High resolution color or monochrome video
    • Complete immunity to ground loop; video and AC can be run in a common raceway, where allowed
    • Video can be run in the same cable with telephone and computer signals
    • Connects Directly to Camera
    • Weather resistant design
    • Easy to install
      Unit Specifications
    Size 1.6”(4.1cm)H x 4.30”(11cm)W x 2.4”(6.1cm)D
    Power Requirements 24-30 VAC 300mA 50/60 Hz
    Power Out 24-30 VAC 250mA 50/60 Hz
    Input Balanced low voltage current loop
    Output 1 vpp composite video
    Monochrome or Color
    Wire Spec 26 to 12 AWG Unshielded Twisted Pair (UTP)
    DC Loop Resistance 51 Ohms/1,000 feet (max) (51 Ohms/300 meters)
    Normal Capacitance 17pF/ft.
    Impedence 100 Ohms +/- 20%
    UTP Category 2 or better

    Select a type of online documentation:


    Title
     
     
     
    DOC
    TS510M Specification Sheet
     
     
     
    TS510M Installation Manual
     
     
     
    TS510M Visio Drawing
     
     
     
    TS510M Autocad Drawing