4 Port Nitek IP and PoE Extender Solution - EL4500U
Etherstretch™

IP and PoE Ethernet Extender:

Model ET4500U

  • Supports 4 network devices, including mega-pixel technology IP cameras
  • IP Network Extender transmits over UTP (Cat5 or Cat6) up to 1,960 ft (600m)
  • Includes 4 Port PoE Transmitter and Power Supply
  • Transparent to the Network
  • No setup required
  • Environmentally Hardened to meet NEMA TS-2 Specifications
  • Patent Pending USA and Europe Euro Pat App 2779641


  • Etherstretch Toolkit


    Use our Online Etherstretch™ Designer Toolkit


    The ET4500U is another component of the NITEK cutting edge EtherStretch line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing or the installation of new Catagory communication (UTP) cabling. With the addition of an external power supply, this transmitter can supply PoE power to operate 4 IP cameras or other network devices. The unit transmits data from the 4 IP network devices over the four pair UTP cable for distances up to 600 meters (1960 feet). The ET4500U is a 4 port transmitter which can work with any of the Nitek multichannel UTP Etherstretch receivers requiring very little installation time and absolutely no set up or configuration. These units quickly turn ordinary UTP cable into a high speed network communication pathway. The ET4500U is transparent to the network thus requiring no IP and MAC addressing. Simply connect your network devices to the IP Ports of the transmitter, connect the transmitter to an Etherstretch branded UTP receiver and the system begins communicating. LED indicators show the status of network communication and PoE power. The ET4500U requires no network settings to be changed or adjusted.

    The NITEK EtherStretch ET4500U extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The ET4500U is ideal for retrofitting existing installations. The units are constructed of industrial grade RoHS compliant plated aluminum which is finished with a corrosion resistant finish making it very durable.

    • Supports 4 network devices, including mega-pixel technology IP cameras
    • Supports 10/100 over Cat5 or Cat6 cables up to distances of 600 meters (1960 feet)
    • Environmentally hardened
    • Fully transparent to the network
    • Built-in surge protection
    • Easy to install, no set up required
    • No MAC or IP addressing required
    • LED indicators for network signals, link status and power
    • Optional power supply can insert POE for up to 4 devices
     Transceiver Unit
    Size 1.0” x 4.0” x 4.3” including tabs (26 x 102 x 109mm)
    Power Requirements 48 to 56Vdc, 1 to 5A Nitek PS48 Power Supply Included
    Ethernet Connection
    [4] Auto Configuring 100BASE-TX Full Duplex
    EtherStretch Link Connection
    [1] Auto Configuring 100BASE-TX Full Duplex
    LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
    Shipping Weight 2.0 lbs.
    Mounting 0.20” Diameter (5.0mm)
    Operating Temperature -40 to 75 degrees C/-40 to 167 degrees F
    Environmental NEMA TS-2 (see spec sheet download)

    Select a type of online documentation:


    Title
     
     
     
    DOC
    ET4500U Specification Sheet
     
     
     
    ET4500U Installation Manual
     
     
     
    ET4500U A&E Specification
     
     
     
    301KB
    ET4500U A&E Specification
     
     
     
    197KB
    ET4500U Visio Drawing
     
     
     
    122KB
    ET4500U Autocad Drawing
     
     
     
    198KB
    NEMA TS-2 Test Report