Nitek IP over Coax Network Extender-PoE Inserter Solution - ET1543C
Etherstretch™

IP Cameras Over Coax Extender

Transmitter Unit: Model ET1543C

  • IP Network Extender transmits over coax up to 1,640 ft (500m)
  • Includes Transmitter unit only
  • Operates with ER8500C or ER16500C Receiver Unit
  • Transparent to the Network
  • No setup required
  • Environmentally Hardened to meet NEMA TS-2 Specifications
  • Patent Pending USA and Europe Euro Pat App 2779641


  • Etherstretch Toolkit


    Use our Online Etherstretch™ Designer Toolkit


    The NITEK Etherstretch™ ET1543C IP cameras over Coax network extender Transmitter unit, is a network extender-PoE Inserter component. The ET1543C operates with either an ER8500C or ER16500C 8 or 16 Port IP Extender/Gigabit PoE Switch Receiver Unit, to form a multi-channel IP extender "over-coax" system. The System transmits IP cameras over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication & PoE path. When operating over RG59U coaxial cable, the coax network extender system can operate for distances of up to 500 meters (1,640 feet). ET1543C Transmitter is part of a system that operates in conjunction with either a ER8500C Eight Port Receiver or ER16500C Sixteen Port Receiver (these receivers are sold separately).The ET1543C coax ethernet extender requires very little installation time & absolutely no set up or configuration. The ET1543C ethernet over coax network extender transmitter is transparent to the network and has no IP or MAC addressing. Simply connect your network devices to the network port of the transmitter along with existing coaxial cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.

    • Transmits up to distances of 500 meters ⁄ 1,640 feet
    • Supports PoE and network communications
    • Supports any network device, including IP cameras
    • Fully transparent to the network
    • Built-in surge protection
    • Easy to install, no set up required
    • No MAC or IP addressing required
    • LED indicators for network signals, link status and power
    • Manufactured in the U.S.A.
    • Backed by a Limited Life Time Warranty
     Transceiver Unit
    Size 1.1"H x 1.6"W x 3.0"D
    Power Requirements PoE from the Head-End
    Ethernet Connection
    [1] Auto Configuring 10 ⁄ 100 RJ45 port
    EtherStretch Link Connection
    [1] Coaxial BNC Connector
    LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
    Shipping Weight 1.0 lbs.
    Mounting Two 3⁄8" mounting slots
    Operating Temperature -40 to 75 degrees C/-40 to 167 degrees F
    Environmental NEMA TS-2 (see spec sheet download)

    Select a type of online documentation:


    Title
     
     
     
    DOC
    ET1543C Specification Sheet
     
     
     
    ET1543C Installation Manual
     
     
     
    ET1543C A&E Specification
     
     
     
    ET1543C A&E Specification
     
     
     
    ET1543C Visio Drawing
     
     
     
    ET1543C Autocad Drawing
     
     
     
    Nema TS-2 Environmental Test Report