4 Port Nitek IP and PoE Extender Solution - EL4500U

IP and PoE Ethernet Extender:

Model EL4500U

  • Supports 4 network devices, including mega-pixel technology IP cameras
  • IP Network Extender transmits over UTP (Cat5 or Cat6) up to 1,960 ft (600m)
  • Includes 4 Port PoE Transmitter, Power Supply and Receiver
  • Transparent to the Network
  • No setup required
  • Environmentally Hardened to meet NEMA TS-2 Specifications
  • Patent Pending USA and Europe Euro Pat App 2779641

  • Etherstretch Toolkit

    Use our Online Etherstretch™ Designer Toolkit

    The EL4500U is another component of the NITEK cutting edge EtherStretch line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing or the installation of new Category communication (UTP) cabling. With the addition of an external power supply, this transmission set can supply PoE power to operate 4 IP cameras or other network devices. The system transmits data from the 4 IP network devices over the four pair UTP cable for distances up to 600 meters (1960 feet). The EL4500U is a 4 port transmitter/receiver set which can work with any of the standard network switch requiring very little installation time and absolutely no set up or configuration. These units quickly turn ordinary UTP cable into a high speed network communication pathway. The EL4500U is transparent to the network thus requiring no IP and MAC addressing. Simply connect your network devices to the IP Ports of the transmitter, connect the transmitter to an Etherstretch branded UTP receiver and the system begins communicating. LED indicators show the status of network communication and PoE power. The EL4500U requires no network settings to be changed or adjusted.

    The NITEK EtherStretch EL4500U extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The EL4500U is ideal for retrofitting existing installations. The units are constructed of industrial grade RoHS compliant plated aluminum which is finished with a corrosion resistant finish making it very durable.

    • Supports 4 network devices, including mega-pixel technology IP cameras
    • Supports 10/100 over Cat5 or Cat6 cables up to distances of 600 meters (1960 feet)
    • Environmentally hardened
    • Fully transparent to the network
    • Built-in surge protection
    • Easy to install, no set up required
    • No MAC or IP addressing required
    • LED indicators for network signals, link status and power
    • Optional power supply can insert POE for up to 4 devices
     Transceiver Unit
    Size 1.0” x 4.0” x 4.3” including tabs (26 x 102 x 109mm)
    Power Requirements 48 to 56Vdc, 1 to 5A Nitek PS48 Power Supply Included
    Ethernet Connection
    [4] Auto Configuring 100BASE-TX Full Duplex
    EtherStretch Link Connection
    [1] Auto Configuring 100BASE-TX Full Duplex
    LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
    Shipping Weight 2.0 lbs.
    Mounting 0.20” Diameter (5.0mm)
    Operating Temperature -40 to 75 degrees C/-40 to 167 degrees F
    Environmental NEMA TS-2 (see spec sheet download)

    Select a type of online documentation:

    EL4500U Specification Sheet
    EL4500U Installation Manual
    EL4500U A&E Specification
    EL4500U A&E Specification
    EL4500U Visio Drawing
    EL4500U Autocad Drawing
    NEMA TS-2 Test Report