Outdoor IP Network Extender - EL1500UWS
Etherstretch™

IP Cameras Over UTP Extender

w/Weatherproof Transmitter & Surge Suppressor:

Model EL1500UWS

  • IP Network Extender transmits over category cable up to 1,960 ft (600m)
  • Includes Receiver and Transmitter in NEMA 4X Outdoor Enclosure
  • Includes IPPWR1 NITEK Surge Suppressor Unit
  • Extends PoE to Transmitter and Ip Cameras or Network Devices
  • Environmentally Hardened to meet NEMA TS-2 Specifications
  • Patent Pending USA and Europe Euro Pat App 2779641


  • Etherstretch Toolkit


    Use our Online Etherstretch™ Designer Toolkit


    The Etherstretch™ EL1500UWS Outdoor IP cameras network extender-PoE Inserter with Surge Suppression is another of the IP Video Transmission Solutions from NITEK. The System includes a receiver, transmitter, surge suppression unit and a NEMA4X rated enclosure to house the transmitter and surge units. The system transmits IP cameras over network category cables and can quickly turn any ordinary 4 pair category cable into a high speed network communication & PoE path.

    When operating over UTP category cable, the network extender system can operate for distances of up to 600 meters (1,940 feet). The EL1500UWS coax ethernet extender system consists of a weatherproof enclosure which houses the transmitter and surge unit and a standard receiver. The system requires very little installation time & absolutely no set up or configuration. The The EL1500U ethernet extender transmitter and receiver are transparent to the network and have no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter and receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.

    When connected to a PoE switch, power from the switch is used as the power source for the connected EL1500UWS receiver. In applications where network switches are not PoE capable, an optional power Inserter (IP1054 sold separately) can be used to insert power to the EL1500UWS receiver. The power is sent from the receiver over the coax to the transmitter. The transmitter uses PoE as its power source and powers the connected PoE network device as well. The EL1500CWS coax network extender system extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.

    • NEMA4X Rated Enclosure to House Transmitter and Surge Suppressor
    • Includes a NITEK IPPWR1 Surge Suppressor Unit
    • Transmits up to distances of 600 meters ⁄ 1,960 feet
    • Supports PoE and network communications
    • Supports any network device, including IP cameras
    • Fully transparent to the network
    • Built-in surge protection
    • Easy to install, no set up required
    • No MAC or IP addressing required
    • LED indicators for network signals, link status and power
    • Optional power supply can insert POE power for non-POE switches
     EL1500CWS
    Receiver Unit Size 1.1"H x 1.6"W x 5.1"D
    Enclosure Size 2.165"H x 5.74"W x 9.92"D
    Power Requirements PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
    Ethernet Connection
    [1] Auto Configuring 10 ⁄ 100 RJ45 port
    EtherStretch Link Connection
    [1] RJ45 Port
    LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
    Shipping Weight 2 lbs.
    Mounting Two 3⁄8" mounting slots
    Operating Temperature -15 degrees to 75 degrees C / 0 degrees to 167 degrees F
    Humidity Up to 85% non-condensing
    Surge Suppression Unit Nitek Model IPPWR1

    Select a type of online documentation:


    Title
     
     
     
    DOC
    EL1500UWS Specification Sheet
     
     
     
    EL1500UWS Installation Manual
     
     
     
    EL1500UWS A&E Specification
     
     
     
    EL1500UWS A&E Specification
     
     
     
    Nema TS-2 Environmental Test Report