Nitek IP Network Extender-PoE Inserter Solution - EL1500U

IP Video Network Extender:

Model EL1500U

  • IP Network Extender transmits over category cable up to 1,960 ft (600m)
  • Includes Transmitter and Receiver units
  • Extends PoE to Transmitter and Ip Cameras or Network Devices
  • Transparent to the Network
  • No setup required
  • Environmentally Hardened to meet NEMA TS-2 Specifications
  • Patent Pending USA and Europe Euro Pat App 2779641

  • Etherstretch Toolkit

    Use our Online Etherstretch™ Designer Toolkit

    The Nitek Etherstretch™ Model EL1500U IP video network extender-PoE Inserter-Injector can quickly turn any ordinary 4 pair category network cable into a high speed network communication & PoE path. When operating over a 4 pair category network cable, distances of up to 600 meters (1,960 feet) can be achieved. The EL1500U IP video network extender system consists of a transmitter and a receiver set, which requires very little installation time & absolutely no set up or configuration. The transmitter and receiver are transparent to the network and have no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter and receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.

    When connected to a PoE switch, power from the switch is used as the power source for the connected EL1500U receiver. In applications where network switches are not PoE capable, an optional power source (PS48 sold separately) can be used to insert power to the EL1500U receiver. The power is sent from the receiver over a 4 pair category cable to the transmitter. The transmitter uses PoE as its power source and powers the connected PoE network device as well. The EL1500U UTP network extender extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.

    • Transmits up to distances of 600 meters ⁄ 1,960 feet
    • Supports PoE and network communications
    • Supports any network device, including IP cameras
    • Fully transparent to the network
    • Built-in surge protection
    • Easy to install, no set up required
    • No MAC or IP addressing required
    • LED indicators for network signals, link status and power
    • Optional power supply can insert POE power for non-POE switches
     Transceiver Unit
    Size 1.1"H x 1.6"W x 3.6"D
    Power Requirements PoE (IEEE 802.3af or at) or PS48 Power Supply
    Ethernet Connection [1] Auto Configuring 10 ⁄ 100 RJ45 port
    EtherStretch Link Connection [1] RJ45 port
    LED Indicators Link Status, Power, PoE Out, 10Mb or 100mb
    Shipping Weight 3 lbs.
    Mounting Two 3⁄8 inch mounting slots
    Operating Temperature -40 to 75 degrees C/-40 to 167 degrees F
    Environmental NEMA TS-2 (see spec sheet download)

    Select a type of online documentation:

    EL1500U Specification Sheet
    EL1500U Installation Manual
    EL1500U A&E Specification
    EL1500U A&E Specification
    EL1500U Visio Drawing
    EL1500U Autocad Drawing
    Nema TS-2 Environmental Test Report