Nitek Four Channel Rack Mounted multiplexed CCTV Video & Data Fiber Optic Receiver

Model Number: FRS541100S00

Four Channel Rack Mount Video & Data Receiver

Nitek's FRS541100S00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode fiber optic cabling type.

The 5000 Series fiber optic transmission systems are designed to provide multi-channel, point-to-point, broadcast quality video transmission at an affordable cost, without compromise. The video is transmitted in a real time full bandwidth digital format. This insures the highest quality regardless of distance. By transmitting the video in an uncompressed format, there is no latency or loss of video quality. The 5000 Series uses Coarse Wavelength Division Multiplexing (CWDM) to transmit 2 wavelength channels for video transmission on a single optical fiber.

Automatic gain control is built into the 5000 Series receivers making this a ‟plug-and-play” video system, requiring no field setup or adjustments. Receivers are equipped with LED indicators which provide an at-a-glance operating and optics state.

  • Real time 10 Bit digital video eliminates signal degradation associated with distance.
  • Automatic Gain control minimizes setup and adjustment time.
  • Switchable P/T/Z data interface allows interfacing with a wide range of manufacturers protocols.
  • Universal-Mode™ allows the same unit to be used with multi-mode or single-mode fiber without any set up or field configuration.
  • Wide dynamic range. Provides ‟broadcast quality” video transmission.
  • Directly supports all NTSC, PAL or SECAM video formats.
  • Units are equipped with front panel LED status indicators to provide at-a-glance diagnostics of the system's video and optics state.
  • Broad operating temperature range for use in protected outdoor applications.
 System Design
Optical Accepts both multi- and single-mode fiber
Multi-mode 50/125 or 62.5/125
Single-mode 9/125
Wavelength 1310nm
1550 Option 1550nm
Single Fiber option 1310/1550nm
CWDM Option 1310-1610nm
Optical Connector SC-PC
Path Loss 20dB min.
CWDM option 22dB min.
 General
Operating Temperature -40 to 165 Fahrenheit
Operating Humidity 0 to 95% non-condensing
Power Requirements +12VDC to +24VDC ac/dc
 Mechanical
Height 5.2
Width 2.1
Depth 6.7
 Video
Compression None, Uncompressed
Input / Output Level 1V p/p nominal
Input / Output Impedance 75 Ohm Unbalanced
Frequency Response 10Hz to 5.75Mhz
Differential Gain 1%
Differential Phase 1
Signal to Noise Ratio 67dB minimum
Fiber Connector SC-PC
Video Connection BNC
Video Standard NTSC/PAL
 P/T/Z Data
Data interface RS232, RS422 (full duplex, two wire)
  RS485 (half duplex, two wire)
Slide switch selectable Yes
Data rate per channel Up to 512kb/s w/o Ethernet
  Up to 256kb/s w/ Ethernet
 Ethernet Data
Data Interface 10/100BaseT auto negotiate
Data Connector RJ45

Select a type of online documentation:


Title
 
 
 
DOC
FRS541100S00 Specification Sheet
 
 
 
FRS541100S00 Installation Manual
 
 
 
FRS541100S00 Visio Drawing
 
 
 
FRS541100S00 Autocad Drawing